I have installed a Netgear wireless extender in my home to expand the WiFi coverage area of the router. I got it installed via the web interface and it worked absolutely fine. All of a sudden it stopped working after a firmware update. Please help me resolve My Netgear WiFi extender not working trouble and get it up and running once again.
Have you come across a similar issue with your WiFi extender by Netgear? You’ve reached the right post wherein you will get the effective solutions for the issue. All you got to do is walk through the post, apply the fixes and get rid of the hindrance. Let’s begin without much delay.
Let’s Fix Netgear WiFi Extender That Stopped Working
Prior to trying anything else, go ahead and examine the power connection of the range extender. Why because, an inadequate power supply is the primary reason why the extender can stop working all of a sudden. What you are supposed to do now is verify the electricity supply to the Netgear extender now. To get this job executes, have a look at the power socket into which the extender is plugged in. Is it damaged? At times the damage is not visible. You should try using a different wall socket to check the same.
Apart from this, examine the power cable of the extender. It mustn’t be loose and defective. Make sure that you’re using the same power adapter that came in the package with the extender. Replace the faulty cable and see if the extender works or not.
If the power supply is all good and still you’re not able to use your extender, then try your hands at the solutions discussed below.
Reboot the Extender
Now that the issue appeared after you updated the firmware on your extender, it might have happened that the updates are stuck. In that scenario, the reboot process helps. To reboot the extender, power it down for some time. Do not forget to remove the power cable from the respective outlet. Let the device remain in the idle state for some time. After that, plug it in and switch it on using its Power button. If this process did not help you get your extender to work, then try the next fix.
Verify the Connection
Have you connected your Nighthawk extender and computer? Not yet? Well, you now have the reason in hand behind getting the problem. No worries! To rectify the problem, connect your devices right away using an Ethernet cable. On the off chance, you don’t want to connect your computer/ laptop and Nighthawk extender using wired source, then connect them wirelessly. How? Click on the WiFi icon on your PC. Upon clicking the icon, a list of active networks will display. From the list, search for the extender’s SSID and upon finding it, connect with it using the WiFi password.
Reset Your Extender
None of the fixes listed above bring you luck? If yes, then you need to reset your WiFi extender.
To reset the extender, here’s what you can do:
- Disconnect the extender and router.
- You also need to disconnect your computer and WiFi extender.
Do not unplug the extender or power it off.
- Find the reset button on your extender and press it using a paper clip.
- Hold the button for 10 seconds and release it.
As soon as you’re done resetting your range extender to the default values, the next step is to set it up once again from the very beginning. Download Netgear Nighthawk app and use it to get the setup done. You can also use the web interface on your PC.
Get the Extender Updated Once Again
Once the setup is completed, go ahead and try to update your extender once again. This time, be more vigilant during the update process. Avoid interrupting the process while in progress. So, ensure that the internet connection is not spotty and the power supply is consistent. You can use the Nighthawk app to update firmware or apply the manual method on web interface of the extender.
The Final Note
Our article on My Netgear WiFi Extender Stopped Working ends here. We hope that the utmost fixes we have listed here will help you resolve the issue easily.