There are times when you need to perform Setek WiFi extender reset process. You may force to execute the reset process in case you face Setek WiFi extender blinking blue light, forgot its admin credentials, or the extender is giving you real hard times connecting to your router. Most of the times, you are tired of implementing the troubleshooting hacks and are left with no other choice than to reset Setek WiFi extender. Resetting Setek WiFi extender is the last resort and very effective to mix numerous issues with the device (the extender). If you are also facing issues with your Setek WiFi extender and want to know how to reset it, then this piece of writting will come in handy.
You will find instructions to reset your Setek WiFi extender in a flash. Thus, without any further delay, let’s get started!
Steps Reset Setek WiFi Extender
Given below are the step by step instructions to execute the Setek WiFi extender reset process:
Step 1: Disconnect the Connected Devices from Your Setek Extender
Commence the Setek WiFi extender reset process by disconnecting any device that is connected to its network. Remove the Ethernet cable as well connecting your range extender and the host router.
To avoid any inconvenience during Setek WiFi extender reset process, we suggest – do not ignore this step of disconnecting your devices.
Step 2: Verify the Setek Extender Power Supply
While you are resetting your Setek WiFi extender, you need to ensure that it is turned on. Therefore, you must make sure to plug the extender into a wall outlet that is non-damaged and well-working as well. In addition to that, ensure that the Setek device is properly powered up and receives stable electricity from its respective wall socket.
The power LED on your Setek extender will light up. It indicates that your Setek device is correctly plugged in and receiving a constant power supply.
Step 3: Reset Setek WiFi Extender
You are now on the final step to reset Setek WiFi extender. What you have to do, find the button labeled Reset on your extender. The button is inside a hole. Once you have find it, you have to press it gently using a paper clip.
Do not use a pin, oil pin, or other pointed object for pressing the Setek extender reset hole.
However, bear in mind – the reset button needs to be pressed for at least 10 seconds. Count from 1 to 10! And, once you are done with counting, release the extender’s reset hole.
The lights on your Setek extender will blink and turn normal within seconds. Your Setek WiFi extender resets successfully.
What After Resetting Setek Extender?
Now that your Setek WiFi extender is reset successfully, you must configure it from scratch. Setek WiFi extender setup can be executed either by using the WPS method or logging into its web interface using the IP address, 192.168.10.1.
Both setup methods are simple and easy to execute. You can use any of them which you find easy. Just for you, we have mentioned the WPS method to perform Setek WiFi extender setup without hindrance.
How to Setup Setek Extender Using WPS Button?
The instructions to set up Setek extender using the WPS method are outlined underneath:
Step 1: First things first, bring your Setek WiFi extender to the same room as that of your host router.
Step 2: Power on your host router and the extender both.
Step 3: Once the devices are powered on, you can proceed to set up Setek WiFi extender using the WPS method.
Step 4: Find the WPS button on your host router. Once you have found it, press it.
Step 5: Within 2-3 minutes, find and press the WPS button on your Setek WiFi extender.
Until you are done with the 5th step, your Setek WiFi extender will be configured already using the WPS method.
To Conclude
You have reset and Setek WiFi extender successfully. You are now free to connect your client device (s) to the new extended WiFi network to enjoy uninterrupted internet range throughout your home. You can also move your extender to a new location in your home, but not away from the reach of your host router.
With that, we are going to conclude our post on how to reset Setek WiFi extender.